How much does a new concrete pool deck cost in Reno?

As of September 2026, a new pool deck poured as plain broom-finish concrete typically runs $7–$12 per square foot in the Reno/Sparks area, the same range as a standard patio pour. A stamped or decorative pool deck runs $8–$19 per square foot. Pool decks are typically a bit larger than a backyard patio, so get a few quotes on your exact square footage before comparing.

Should I resurface a cracked or uneven pool deck, or replace it?

Resurfacing or leveling makes sense for cosmetic cracking, minor settling, or a rough/slippery surface — basic overlay resurfacing runs $3–$7/sq ft, and mudjacking a sunken section runs roughly $3–$6/sq ft (polyurethane foam injection $6–$12/sq ft) per a Reno-area contractor directory. Full replacement is usually the right call when a slab has multiple large structural cracks, has settled unevenly near the pool shell itself, or when you're changing the finish (adding a stamped or cool-deck surface) at the same time.

Why do Reno pool decks crack or heave more than decks in milder climates?

Washoe County's design frost-line depth is 24 inches (per the county's own construction design standards), and pool decks in particular see repeated wet/freeze cycling right at the slab edge where splash-out water collects. A deck poured without adequate base prep, control joints spaced correctly, and reinforcement matched to that freeze-thaw exposure is more likely to crack or heave here than in a warmer climate — ask any bidder how they're accounting for it.

What finish options are there for a Reno pool deck — broom, stamped, or a cool-deck coating?

Broom-finish concrete is the cheapest and most slip-resistant baseline. Stamped or exposed-aggregate concrete costs more but reads as a finished hardscape feature rather than plain gray flatwork (see the Stamped Concrete page for that cost breakdown). A cool-deck or textured acrylic coating can be applied over existing concrete specifically to cut surface temperature and improve slip resistance around a pool — that is a resurfacing-scope job, not a new pour, and costs closer to the resurfacing figures above than a new-pour figure.

Pool Decks

Concrete Pool Deck Cost in Reno & Sparks

As of September 2026, a new broom-finish pool deck in the Reno/Sparks area typically costs $7–$12 per square foot, the same range as a standard patio pour — a stamped or decorative deck runs $8–$19 per square foot. Reno Concrete Pro matches you with independent, licensed contractors who quote your exact deck size and finish.

Backyard swimming pool with a light-colored concrete deck surrounding it

Pool deck cost, Reno/Sparks

New broom-finish pour, per sq ft	$7–$12
New stamped/decorative pour, per sq ft	$8–$19
Basic resurfacing/overlay, per sq ft	$3–$7
Mudjacking a sunken section, per sq ft	$3–$6
Polyurethane foam leveling, per sq ft	$6–$12

Methodology: New-pour figures from HomeBlue's Reno-specific patio and stamped-concrete data (RENO-036); resurfacing and leveling figures from a Reno-area contractor directory (RENO-037), read live September 2026.

New pour vs. resurfacing an existing deck

A pool deck takes more direct weather exposure than most flatwork — standing pool water, splash-out, and pool chemicals all sit right at the surface. That makes resurfacing a genuinely common fix here rather than an automatic replace: a contractor can often level a sunken section with mudjacking or polyurethane foam injection, or apply a resurfacing overlay over cosmetic cracking, for a fraction of a full tear-out and re-pour. Full replacement makes more sense when the slab has multiple large structural cracks, has settled unevenly close to the pool shell itself, or when you're changing finishes at the same time (for example adding a stamped pattern or a cool-deck coating).

What drives the price on a pool deck specifically

Finish. Plain broom finish is the baseline; stamped, exposed-aggregate, or a cool-deck acrylic coating all cost more — see the Stamped Concrete page for that spread.
Access around the pool. A deck a ready-mix truck or pump line can reach easily is cheaper than one behind a locked side gate or up a slope.
Existing slab condition. Resurfacing or leveling an existing deck is almost always cheaper per square foot than a full tear-out and new pour.
Drainage and slope. A deck has to slope correctly away from the pool coping — re-establishing that slope on a replacement adds grading work a simple resurfacing job doesn't need.
Size. Pool decks tend to run larger than a typical backyard patio, so the total project cost is usually higher even at the same per-square-foot rate.

Permits and Washoe County specifics

Pool deck flatwork typically needs a permit through the same shared regional system Reno, Sparks, and Washoe County use for every other trade — onenv.us — rather than three separate offices. Because a pool deck sits directly against a pool shell and often against pool fencing/barrier requirements, confirm with your contractor exactly what's required for your address before work starts; we don't publish a fee schedule we haven't independently verified.

Before you hire

Ask every bidder for their Nevada NSCB license number and verify it yourself at https://app.nvcontractorsboard.com — confirm it's classified C-5 (Concrete Contracting) and check the monetary limit against your project size. See How to Choose a Reno Concrete Contractor for the full vetting checklist, or how to run the NSCB lookup step by step.