Cost & Pricing
Concrete Cost in Reno & Sparks, NV
As of September 2026, concrete flatwork in the Reno/Sparks area typically runs $6–$11 per square foot for a reinforced driveway, foundation slab, or plain patio, and $8–$19 per square foot for stamped or decorative finishes. Reno Concrete Pro doesn't pour concrete — we match you with independent, NSCB-licensed contractors who quote your actual project.
Concrete cost by project type
Every figure below is a real, sourced range for Reno/Sparks or, where noted, the closest available national benchmark — never an invented number. Click through to a project page for the full write-up, cost factors, and what's included at each price point.
Driveways — see full breakdown at /concrete-driveways-reno/
| Reinforced, per sq ft | $6–$11 |
|---|---|
| Un-reinforced, per sq ft | $6–$10 |
| Typical 2-3 car driveway, total | $4,000–$9,700 |
Methodology: HomeBlue, Reno-specific data, published 2024-06-10 (RENO-034)
Foundations & footings — see full breakdown at /concrete-foundations-reno/
| Reinforced slab, per sq ft | $6–$11 |
|---|---|
| Un-reinforced pad, per sq ft | $6–$10 |
| Washoe County frost line | 24" |
Methodology: HomeBlue, Reno-specific data, published 2024-09-27 (RENO-035); Washoe County frost-line depth (RENO-020)
Patios & flatwork — see full breakdown at /concrete-patios-reno/
| Plain, reinforced, per sq ft | $7–$12 |
|---|---|
| Plain, un-reinforced, per sq ft | $6–$11 |
Methodology: HomeBlue, Reno-specific data, published 2022-04-26 (RENO-036) — the oldest figure on this site, shown alongside a fresher national comparator
Stamped & decorative — see full breakdown at /stamped-concrete-reno/
| Basic pattern, per sq ft | $8–$13 |
|---|---|
| Mid-range, per sq ft | $13–$19 |
| High-end, per sq ft | $19–$26+ |
Methodology: HomeGuide, national, published 2025-12-23 (RENO-036)
Repair & resurfacing — see full breakdown at /concrete-repair-reno/
| Basic resurfacing, per sq ft | $3–$7 |
|---|---|
| Stamped overlay, per sq ft | $7–$20 |
| Typical repair project, total | $600–$13,000 |
Methodology: HomeGuide (2026-02-03) + Angi (2026-07-09) + Homewyse (pulled 2026-09-16), national; ConcreteWorks.io Reno directory estimate shown separately (RENO-037)
What actually moves a concrete quote
Two bids for what sounds like the same job can land thousands of dollars apart, and it's rarely because one contractor is padding the price. The line items that move a Reno-area concrete quote the most:
- Site prep and access. Grading, compacting base rock, and removing an old slab or asphalt pad add real labor before a truck ever pours. A backyard job a mixer truck can't reach directly (requiring a pump truck or wheelbarrow relay) costs more than a driveway poured curbside.
- Reinforcement. Rebar grids cost more than wire mesh, which costs more than fiber-reinforced mix alone — and for anything load-bearing (a driveway, a foundation), the right reinforcement isn't optional.
- Finish. A broom finish is the cheapest; exposed aggregate, stamped patterns, and integral color all add material and labor cost, roughly in that order (see the Stamped Concrete page for the full spread).
- Slab thickness and footing depth. Washoe County's design frost-line depth is 24 inches — footings and load-bearing slabs set shallower than that are more exposed to freeze-thaw heaving, so a contractor quoting proper depth for this area may quote more concrete than one who isn't accounting for local conditions.
- Demolition. Removing an existing slab or driveway before the new pour runs roughly $1.20–$1.80 per square foot on top of the install cost.
Looking for a specific project type?
The ranges above cover general flatwork. For project-specific pricing, see Pool Deck Cost in Reno or Concrete & Block Wall Cost in Reno. Not sure whether we cover your neighborhood? Check the Reno/Sparks service area.
Before you sign anything
Nevada law (NRS 624.970) caps a residential contractor's lawful down payment at the lesser of $1,000 or 10% of the contract price. On a $10,000 driveway job, the most a licensed contractor can legally ask for up front is $1,000. Every contractor should also carry an active Nevada NSCB C-5 (Concrete Contracting) license — verify it yourself at https://app.nvcontractorsboard.com before signing. See How to Choose a Reno Concrete Contractor for the full vetting checklist. Need to check one specific license number? Use our step-by-step NSCB verification guide.